Carfentrazone-ethyl 1.5%+Tribenuron-Methyl 3.5%+Fluroxypyr-Meptyl 24.5% WP
Product Information
| Item | Details |
|---|---|
| Active Ingredients | 1.5% Carfentrazone-ethyl + 3.5% Tribenuron-methyl + 24.5% Fluroxypyr-meptyl |
| Form | Wettable Powder (mix with water before spray) |
| Appearance | Fine off-white powder |
| Shelf Life | 2 years if stored in cool, dry and sealed place |
| Available Pack Sizes | 100g, 250g, 500g, 1kg, 25kg |
| Custom Service | Custom packaging and your own brand label available |
| Use | Spray after wheat and weeds grow out, to remove broadleaf weeds |
1.What is this herbicide?
This is a ready-mixed weed killer powder specially designed for wheat farms. It combines three different weed-killing ingredients into one powder.
Many single-ingredient weed killers only work on easy weeds. Over time, some tough weeds will no longer die from these products. Farmers need to buy 2 or 3 separate chemicals and spray several times. This 3-in-1 mix simplifies farm work. You only need to prepare one tank of spray liquid.
The powder mixes well with clean water. It stays stable in the spray tank and will not block spray nozzles easily. It controls most common annual broadleaf weeds and some deep-rooted perennial broadleaf weeds in wheat fields, so weeds will not compete with wheat for water and nutrition, protecting your wheat yield.
2.Why choose this 3-in-1 herbicide powder?
- Three different weed killing ingredients in one pack: It works well even for weeds that have become tough to kill with single weed killers. It slows down the chance that weeds become resistant.
- Fast visible effect + long-lasting control: One ingredient burns weed leaves quickly. The other two move inside the plant all the way down to roots, so weeds cannot grow back easily.
- Covers a wide range of broadleaf weeds: It controls many hard weeds that ordinary weed killers fail on, including cleavers and other stubborn weeds.
- Save labor and fuel: One spray replaces multiple rounds of field work. Farmers cut down time, fuel and machine costs.
- Easy to mix and spray: Powder dissolves evenly in clean water. Less sediment in spray tank, fewer nozzle blockages during field work.
- Safe for wheat if used correctly: When sprayed at the right wheat growth stage and correct dosage, wheat will not get hurt and normal growth stays on track.
- Flexible package options: Small packs for field trials, large bulk packs for big farms. We can print your own brand logo on packages.
3.How does this 3-ingredient mix kill weeds?
Each ingredient attacks weeds in its own way, and they work better together.
- Carfentrazone-ethyl: Works on the leaf surface. Once sprayed on weeds and exposed to sunlight, weed leaves dry and turn brown quickly. You can see damage within hours. It gives fast visible results.
- Tribenuron-methyl: Gets absorbed by leaves and roots. It stops weeds from growing. Small weeds slowly turn yellow and die. Great for many common small broadleaf weeds.
- Fluroxypyr-meptyl: Travels deep inside weeds. It changes weed growth, making stems twist and swell. It works well on deep-rooted weeds that are hard to remove completely.
Together, they bring fast leaf burn and deep root kill. Weeds are less likely to survive because they need to resist three different ways of attack at the same time.
4.Which crops and weeds does it work on?
- Target Crops: Winter wheat, Spring wheat.
- Important: Only spray when wheat is in tillering stage, before wheat stem starts to grow tall. Do not spray after wheat jointing.
- Weed control:Galium aparine (cleavers), Capsella bursa-pastoris (shepherd’s purse), Veronica spp., Abutilon theophrasti, Chenopodium album, Amaranthus retroflexus, Stellaria media (chickweed), Polygonum aviculare, Malva parviflora, Solanum nigrum, Myosotis arvensis, Thlaspi arvense and other annual broadleaf weeds. It also works on some deep-rooted perennial broadleaf weeds.
- Important Note:This product **cannot kill grass weeds**. If your field has grass weeds, you need to add a separate grass weed killer and test compatibility before full spraying.
5.How to spray this product in fields?
- Best spray time: Spray after wheat and weeds have come out of soil. Wheat should be tillering, before stem elongation. Best weed size: 2–6 leaves, young and actively growing. Large, old weeds will be harder to kill.
- Water amount: Use 200–300 liters clean water per hectare. Keep stirring while adding powder and during spraying to keep liquid well mixed.
- Spray tips: Use flat fan nozzles. Spray evenly to fully wet all weed leaves. Do not miss any area, and avoid spraying the same spot repeatedly.
- Good weather for spraying: Temperature between 10–25°C, humidity not too low. Spray early morning or late afternoon. Do not spray under strong hot sun, drought or frost.
- Rain protection: After spraying, wait 4–6 hours without heavy rain. If heavy rain comes before this time, spray liquid may wash off leaves and reduce effect. You may need to check weeds and re-spray if needed.
- Dosage: Always follow local official label rate for your country. Weed pressure and local rules vary in different regions.
6.How to stop weeds from becoming hard to kill?
If farmers keep using the same type of weed killer year after year, weeds can adapt and become harder and harder to kill. Once this happens, weed control becomes expensive and difficult.
This 3-in-1 mix uses three different weed killing methods, so it is a good choice to avoid weeds getting tough.
- Do not use this product every single season on the same field.
- Use other types of weed killers in alternate growing seasons.
- Combine chemical spraying with farm management: change crop types, use clean seeds, good farming practices.
- Check your fields regularly. If weeds do not die as expected and you followed all spray rules, stop using this product on that field.
- Never use less than the recommended dose. Low dose makes weeds easier to build tolerance.
7.Safety rules & things you must watch out for
- Sensitive plants: Wind can carry spray drops to nearby crops and damage them. Barley, oats, corn, vegetables, cotton, sunflower, potatoes, fruit trees and ornamental plants can get damaged easily. Do not spray when wind is strong. Keep safe buffer zones next to sensitive crops.
- Personal protection: Wear chemical-resistant gloves, long coveralls, safety goggles and mask when mixing powder and spraying. Wash your hands and exposed skin after finishing work. Do not eat, drink or smoke while handling this product.
- Protect water: This product is harmful to fish. Keep powder, spray liquid and waste water away from ponds, rivers, lakes and drinking water sources. Never pour leftover liquid or empty bag waste into water.
- Storage: Keep product sealed in original bags. Store in cool, dry, ventilated warehouse. Keep away from food, animal feed, seeds and fertilizer. Keep out of reach of children and farm animals. Protect from direct sun and moisture.
- Waste handling: Do not reuse empty bags. Dispose of empty packages and leftover liquid following your local environmental rules.
8.Pack sizes custom label & delivery
1.Small packs: 100g, 250g, 500g, 1kg for field demo and small farm tests.
2.Bulk pack: 25kg for distributors and large farms.
3.Custom brand service: We can make custom bags, print your logo and multi-language labels. We can also provide label drafts for your.
4.Sample support: We can provide samples for lab test and field trial. Sample freight cost can be discussed.
5.MOQ: Negotiable, depends on packaging type and order details.
6.Shipment: We ship to major ports all over the world. Delivery time depends on order quantity, label confirmation and destination country. Contact us to get delivery time and shipping cost.
9.FAQ
Q1: Can this product kill grass weeds in wheat fields?
A: No. It only kills broadleaf weeds. It does not work on grass weeds. If grass weeds exist in your field, you need to add another grass weed killer. Always test mixing a small amount first before full tank mixing.
Q2: How fast will I see weeds turn brown after spraying?
A: You can see weed leaf burn within several hours under sunlight. Weeds stop growing gradually. Full weed death usually takes 3–7 days, depending on weed size, weed type, temperature and humidity. Bigger weeds take longer time to die.
Q3: Can I mix this powder with other farm chemicals or foliar fertilizer?
A: Mixing is possible in some cases. We strongly suggest you test a small jar mix first before full field tank mixing. Do not mix with very strong acid or alkaline products. Avoid mixing products that create lumps or precipitation.
Q4: Will this weed killer hurt wheat?
A: Wheat stays safe if you use the correct dose and spray during wheat tillering stage before stem grows tall. Risk of damage increases if you use too much product, spray after wheat jointing, spray in extreme weather or spray drifts to wheat. In rare cases, wheat leaves may turn slightly yellow temporarily; wheat usually recovers quickly.
Q5: What happens if heavy rain falls right after spraying?
A: You need 4–6 hours without heavy rain after spraying. If heavy rain comes before this period, spray liquid may wash off weed leaves and reduce effect. You need to check weed condition and decide whether re-spray is needed.
Q6: Can I use this weed killer on barley or oats?
A: No. Barley and oats are sensitive to this product. Only use on wheat.
Q7: Can you print my own brand logo on the packages?
A: Yes, custom private label service is available. We can customize bags, print your logo and local language labels. We also provide label drafts for your local registration application.
